Glazes

A glaze is a thin layer of glass fused to clay. Three kinds of ingredients make it work, and the cone you fire to decides how they behave.

The three building blocks

  • Silica forms the glass.
  • Fluxes (such as calcium, sodium, potassium, magnesium, boron) lower the melting point so the glass forms at kiln temperatures.
  • Alumina stiffens the melt so it stays on the pot and adds durability.

Colorants (iron, cobalt, copper, chrome, manganese) and opacifiers (tin, zircon) modify the look.

Match glaze, clay and cone

Use glazes formulated for your firing range: cone 06–04, cone 5–6 or cone 10. An under-fired glaze is dry and rough; an over-fired one runs off the pot.

Glaze fit

  • Crazing (fine crack network): the glaze shrinks more than the clay. It weakens ware and can harbor bacteria in functional pieces.
  • Shivering (glaze flaking off edges): the opposite problem, and dangerous on rims.

Application

Dip, pour, brush or spray onto clean bisqueware. Wax the foot, and wipe glaze off the bottom quarter-inch (5 mm) to protect kiln shelves.

Food safety

  • Use glazes labeled food safe for your cone, and fire them correctly.
  • Be cautious with high copper, manganese, barium or lead-containing materials; never use raw lead.
  • Test functional glazes for leaching, especially brightly colored or matte ones.
  • Wear a respirator (P100 or N95 minimum) when mixing dry materials.

From the notebook