Kiln Temperature Chart

Two references every potter reaches for: the color of a glowing kiln and the temperature equivalents of pyrometric cones.

Color of heat

Glowing ware and kiln walls change color as temperature rises. Judging by eye is approximate: it depends on ambient light, eyesight and atmosphere, so rely on cones and a pyrometer for real control. Never look into a spy hole without proper eye protection (shade 3–5 glasses for regular checks).

Faintest red (visible in the dark)about 885 °F · about 475 °C
Dark redabout 1,300 °F · about 700 °C
Cherry redabout 1,500 °F · about 815 °C
Bright cherry / light orangeabout 1,800 °F · about 980 °C
Orange-yellowabout 2,000 °F · about 1,095 °C
Yellowabout 2,200 °F · about 1,205 °C
Yellow-whiteabout 2,400 °F · about 1,315 °C

Orton cone temperatures

Pyrometric cones measure heat work (temperature and time), not temperature alone. The values below are approximate end points for Orton self-supporting cones heated at 108 °F (60 °C) per hour over the last stretch of the firing; faster firings bend cones at higher temperatures, slower firings at lower ones.

Cone°F°CTypical use
Cone 061,828 °F998 °CLow-fire glazes, many commercial underglazes
Cone 051,888 °F1,031 °CLow-fire glazes
Cone 041,945 °F1,063 °CCommon bisque firing; low-fire glaze
Cone 031,987 °F1,086 °C
Cone 022,016 °F1,102 °C
Cone 012,046 °F1,119 °C
Cone 12,079 °F1,137 °C
Cone 22,088 °F1,142 °C
Cone 32,106 °F1,152 °C
Cone 42,124 °F1,162 °C
Cone 52,167 °F1,186 °CMid-range glazes
Cone 62,232 °F1,222 °CMid-range stoneware and porcelain, very common in electric kilns
Cone 72,262 °F1,239 °C
Cone 82,280 °F1,249 °C
Cone 92,300 °F1,260 °C
Cone 102,345 °F1,285 °CHigh-fire stoneware and porcelain, reduction firing

Rounded, approximate values for education. Use the official Orton chart for your cone type and heating rate.

Using cones well

  • Place a cone pack (guide, firing and guard cones) where you can see it, on several shelves if you can.
  • A cone is “down” when its tip touches the base level.
  • Electric kiln controllers can drift; witness cones keep them honest.

From the notebook