Studio Equipment & Safety

A good studio is less about expensive gear and more about workflow, ventilation and clean habits.

The wheel

Electric wheels vary mainly in motor power (how much clay they can center) and noise. For most functional work, a mid-size wheel with a reversible motor and removable splash pan is plenty. Kick wheels are quiet and meditative.

Kilns: electric or gas?

  • Electric: clean, programmable, ideal for cone 06–6 oxidation firings; needs a dedicated circuit sized to the kiln, installed by an electrician.
  • Gas: allows reduction atmospheres and the classic cone 10 looks; needs outdoor or specially vented space and permits.

Ventilation

Kilns release water vapor, carbon monoxide and fumes from burning organics and glaze materials. Use a downdraft kiln vent or hood vented outdoors, and never fire in a living space without proper venting.

Silica dust: the main hazard

Dry clay and glaze materials contain crystalline silica, which can cause silicosis when inhaled over time.

  • Clean with a wet mop or sponge, never by sweeping dry.
  • Use a HEPA vacuum if you vacuum at all.
  • Wear a properly fitted respirator (P100 or N95 minimum) when mixing dry materials or sanding.
  • Keep studio clothes in the studio and wash them separately.

Other basics

  • Sturdy wedging table (canvas over plaster or concrete).
  • Ware boards and shelves for drying with airflow.
  • Clay trap on the sink: never pour slurry down the drain.

From the notebook