Raku Firing

In raku, pots are pulled from the kiln while glowing hot and smothered in combustibles. The result is crackle, smoke and metallic luster in under an hour.

The process

  1. Bisque-fire a raku-friendly, thermal-shock-resistant clay (usually heavily grogged).
  2. Glaze with low-fire raku glazes.
  3. Fire quickly in a small gas kiln until the glaze melts, typically around 1,800 °F (about 980 °C), judged by the glaze surface and pyrometer.
  4. With tongs, move the glowing pot into a metal can of sawdust, leaves or newspaper; flames erupt; close the lid to starve the fire of oxygen.
  5. After reduction, cool, scrub off soot and reveal the surface.

Typical effects

  • Crackle: thermal shock crazes the glaze and smoke blackens the cracks.
  • Copper matte and luster: reduction pulls oxygen from copper, giving metallic reds, purples and golds.
  • Naked raku: a resist layer that peels away to leave smoke lines on bare clay.

Safety

  • Fire outdoors, away from buildings and overhanging trees, with a fire extinguisher at hand.
  • Wear natural-fiber clothing, a face shield, leather or Kevlar gloves and closed shoes.
  • Raku ware is porous and decorative: not for food or liquids.

From the notebook